Telescoping
covers of AKDQ or stainless steel are the best solution when hot
oils, coolants, metal chips and heavy material removal are present
in the machining environment.
BUWW can provide
covers for horizontal, vertical and crossrail mounting. Covers are
designed for traversing speeds of up to 30 meters/minute.
All heavy covers
have friction-reducing bearings or rollers to facilitate easy movement
and prolong cover life.
BUWW has all
wiper styles available to ensure a clean wipe for any application.
Walk-on type
covers can be supplied upon request.
Important Cover Features
| 1 |
High-strength
AKDQ or stainless steel construction. Walk-on type covers can
be supplied upon request.
|
|
| 2 |
Heavy-duty
polyurethane or synthetic rubber wipers clean the cover and
keep fluids and debris out.
|
|
| 3 |
Steel
casings over the wipers can be used to protect wiper lip for
longer life. |
|
| 4 |
Wrap
around construction assists in the alignment of individual cover
boxes and provides proper pre-load to wipers. |
|
| 5 |
Rollers
are used on large covers to aid smooth, dependable operation. |
|
| 6 |
Rollers
and guides support the covers and assist opening and closing
during cover cycling.
|
|
| 7 |
Way
guides are brass or plastic pieces used on small to medium size
telescoping covers to reduce friction and support the covers.
|
|
| 8 |
Side
brass is a guide that acts as a wear strip between boxes and
also extends cover life.
|
|
| 9 |
Lifting
supports are provided on large covers for easier handling.
|
|
| 10 |
Way
extensions extend the machine ways and provide support for the
cover to maximize machine travel.
|
|
| 11 |
Mounting
flange secures the cover to the machine to assure proper alignment
for cover cycling.
|
|
| 12 |
Scissors mechanisms force boxes to move together for smooth
cycling on high-speed machines.
|
|
| 13 |
Rubber
shock absorbing bumpers are used to reduce noise on high speed
covers.
|
|
|
